The ST support bench is optional and available for our hose saws NC25/NC30 (small model) and NC40/NC50 (larger model).
The smoke extraction kit reduces considerably the amount of smoke and dust created during the cutting process of rubber hoses.
It is available for our hose saws NC25, NC30 (except 12V), NC40 and NC50.
The kit consists in an extractor with stainless steel tank and HEPA filter, in a non flammable connection hose and a spark arrester which protects the kit against fire hazard in the rubber dust.
The NHM70 hose measurer can be used for hoses from OD 6 mm to 70 mm (2" 4SP) It has a 5 digit display (m and cm) with a 2% length precision. The counter reset is manual.
The CR100 cutting rail is available to be placed on the left or right hand side of the machine (read direction). It is avaialble in one meter sections and its engraving cannot be erased. The total maximum length is 6 meters.
2 mm zinc plated steel
Support foot and backstop in option. 1 foot per 1 meter of rail
V shaped with flat area for an easier bolting onto a bench.
The electric NKS16 was successfully launched in 2021. It is available in 220V-50HZ-1PH or in 12VDC and can crimp hoses up to 1" 2SN.
Read more ...
